2016 Challenger SRT HELLCAT 6.2L 8HP90 Swap Kit 707HP 650LBFT 41k Miles

Description

We are the only supplier of completely stand-alone swap ready turnkey HELLCATS

This Swap Ready Turnkey pallet features a Dodge HELLCAT 6.2L and 8HP90 8-speed automatic out of a 2016 Charger SRT with 41,771 actual miles. It is a 6.2L HELLCAT rated at 707 horsepower and 650 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 2C3CDXL90GH297169. This engine can be purchased as either an engine only, manual, or automatic turnkey pallet package. Features unlocked GPEC2A ECM for HP Tuners Tuning. ***Includes a Holley 302-63 rear sump oil pan for easier swapping***

OUR KIT DOES NOT REQUIRE MOPAR’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MOPAR STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

• Turnkey HELLCAT 6.2L 707 hp and 650 ft-lbs 41,771 actual miles
• Holley 302-63: Rear sump swap oilpan
• GRIPTEC LV2 3.35″ Upper Pulley
• MOPAR 05038838AA 700cc Fuel Injectors
• 8HP90 8-speed automatic transmission
  • Stand-alone automatic transmission controller included
• Flashed ECM – SKIM removed UNLOCKED GPEC2A for HP Tuners Tuning
• OBD2/DLC connector (wired up and ready to be used to tune)
• Stand-Alone wiring harness
• Fuel Pump (pre-wired for ease of installation)
• Radiator
• Cooling Fan (pre-wired for ease of installation)
• Turnkey pallet (ready to run by adding battery and fuel cell)
• Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
• Fresh oil change