Gen I Mustang Coyote Swap Kit 5.0L 412-420hp 390LB-FT
$6,749.99
Current Lead Time: 6 months
We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s
***IF YOU WANT AN AUTOMATIC YOU MUST PURCHASE A GEN 2 or GEN 3***
This Swap Ready Turnkey pallet features a Ford Performance Coyote engine out of a 2011-2014 Mustang with less than 125,000 miles. It is a Coyote 5.0L rated at 412-420 horsepower and 390 ft-lbs of torque from the factory. The VIN will be provided to you from your specific donor vehicle. You can choose your transmission option from the highly sought 6R80 automatic or the fun MT82 6 speed manual! Please choose your choice of transmission below as well as other optional upgrades. This combination is perfect for any Ford Bronco, restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
Description
Current Lead Time: 6 months
We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s
This Swap Ready Turnkey pallet features a Ford Performance Coyote engine out of a 2011-2014 Mustang with less than 125,000 miles. It is a Coyote 5.0L rated at 412-420 horsepower and 390 ft-lbs of torque from the factory. The VIN will be provided to you from your specific donor vehicle. You can choose your transmission option from the highly sought 6R80 automatic or the fun MT82 6 speed manual! This combination is perfect for any Ford Bronco, restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
Your kit will be set up similar to this: